进口潜水泥浆泵采用德国HANK先进技术设计制造,独特的密封装置能够有效平衡油室内外压力,最大限度保护了机械密封的可靠性,电机采用过热保护、进水检测保护等多种保护措施,能够在恶劣的工况条件下长期安全的运行。潜水吸沙泵的前置搅拌叶轮能将沉积淤积物冲击成高浓度的湍流,使水泵在无须附属装置的情况下实现高浓度吸淤。
进口潜水泥浆泵-德国HANK原装品牌搅拌立式高扬程潜水泥浆泵厂家结构特点:
1. 不锈钢潜水泥浆泵整机为干式潜水泵型,电机采用油室密封方式,内设机械密封,能有效防止高压水和杂质进入电机内腔。
2. 除主叶轮外,还有搅拌叶轮,能将沉淀于水底的淤渣搅拌成湍流后抽取出来。
3. 叶轮和搅拌叶轮等过流部件采用高硬度的高鉻铸钢制造,耐磨、耐腐、排污能力强,能通过较大的固体颗粒。
4. 电机潜入水下,不受吸程限制,吸渣率高,清淤更彻底。
5. 不锈钢潜水污泥泵整体设备简化,机组总投资降低。
进口潜水泥浆泵-德国HANK原装品牌搅拌立式高扬程潜水泥浆泵厂家使用条件:
1.电源为50Hz/380V三相交流电源.
2.介质最高温度不得高于60℃,介质中不含易燃易爆性气体。
3.介质中固体颗的最大重量浓度:灰渣为45%,矿渣为60% 。
4.机组潜水深度:不大于20米,不小于1米。
5.机组在介质中的工作位置为立式,工作状态为连续。
The submersible mud pump is designed and manufactured with German HANK advanced technology. The unique sealing device can effectively balance the pressure inside and outside the oil chamber and maximize the protection of the reliability of the mechanical seal. The motor adopts various protective measures such as overheating protection and water inlet detection protection. Long-term and safe operation under harsh working conditions. The pre-mixing impeller of the submersible sand suction pump can impact the sedimentation and silt into a high-concentration turbulent flow, so that the pump can achieve high-concentration suction and sludge without auxiliary equipment.
Structural features:
1. The stainless steel submersible mud pump is a dry submersible pump type. The motor adopts an oil chamber sealing method with a mechanical seal inside, which can effectively prevent high-pressure water and impurities from entering the inner cavity of the motor.
2. In addition to the main impeller, there is also a stirring impeller, which can stir the sludge deposited on the bottom of the water into a turbulent flow and then extract it.
3. The flow parts such as the impeller and the stirring impeller are made of high-hardness, high-chromium cast steel, which is wear-resistant, corrosion-resistant, and has strong sewage discharge capabilities, and can pass larger solid particles.
4. The motor is submerged under water and is not limited by the suction range, the slag suction rate is high, and the dredging is more thorough.
5. The overall equipment of the stainless steel submersible sludge pump is simplified, and the total investment of the unit is reduced.
Conditions of Use:
1.The power supply is a 50Hz/380V three-phase AC power supply.
2. The maximum temperature of the medium should not be higher than 60℃, and the medium does not contain flammable and explosive gases.
3. The maximum weight concentration of solid particles in the medium: 45% for ash and 60% for slag.
4. Crew diving depth: not more than 20 meters, not less than 1 meter.
5. The working position of the unit in the medium is vertical, and the working state is continuous.
GERMANY HANK PUMP LIMITED is founded on 1852 in Monchengladbach,which is located at one city in North Rhine in Germany, which is the west of Nordrhein-Westfalen. At the beginning of 1850s, as the rapid development of economic and the shortages of energy in Germany , the government had been in saving energy aspect. On this occasion, HANK Pump (Trouble Less Pump) was established.Hank pump is the world-famous transnational production enterprise,which produces high quality and advanced pump, measurement and control system, and which has its divisions and branches in dozens of countries in the global. The company products user involves the petroleum, the chemical industry, the electric power, the metallurgy, the drugs manufacture, food, the water treatment, the municipal administration to give draining water, the natural gas, the papermaking, the electronics industry, the building, the mechanical device necessary ect..
The conclusion of the pump concept in German Hank pump is resposibility,foresight,innovation. For ourselves resposibility, foresight and focusing on creating unprecendented solution and concept,our company has become the lead of pump manufacturer in the global.