找商网手机端：m.zhaosw.com
收藏 
进口低温减压阀-德国原装品牌高压-气体-不锈钢液氮低温减压阀厂家
价格
订货量(台)
￥3600.00
≥1
￥3500.00
≥10
店铺主推品 热销潜力款
联系人 方同 经理
専將将尊専專將尊尉專尊
发货地 广东省深圳市
在线客服
商品参数
|
商品介绍
|
联系方式
品牌 德国HANK
订货号 SKU15007
货号 15007
材质 不锈钢
连接形式 焊接、法兰
结构形式 直通
公称通径 DN15-DN50
适用介质 乙烯、液氧、液氢、液化天然气、液化石油产品
压力环境 常压
工作温度 低温
标准,流动方向 德标,单向
驱动方式 手动
零部件及配件 阀芯
用途 减压
商品介绍
进口低温减压阀主要在低温贮槽上及管路系统中低温液体气体的压力调节，其利用弹簧和不锈钢膜片来调节阀后压力，使压力保持在一定范围内。
The Model 1000HP is a high capacity, high pressure regulator used to control downstream pressure between 10 and 300 psig (0.69 and 20.7 Barg). Available in sizes from 1/2" through 2" (DN15 through DN50).
The unique internal design allows use in a multitude of applications, including process fluids that normal pressure reducing regulators can not match. The most versatile self- contained, pressure reducing regulator available to users.
FEATURES
Streamlined Flow Path：
Straight-through flow path reduces internal turbulence and resistance to flow, increas ing stability and capacity.
High Inlet Pressures:
Standard construction allows inlet pressures up to 740 psig (51.0 Barg).
High Outlet Pressures:
Controlled outlet pressure up to 300 psig(20.7 Barg).
High Pressure Drop：
Standard construction with extended guiding allows pressure drop up to 650 psid
(44.8 Bard). This regulator is routinely applied in severe service conditions
Flow-to-Open Plug：
Provides unmatched rangeability - far greater than competitive flow-to-close
designs. Highly stable at either high or low flow rates.
Versatility：
Four body materials and nineteen trim ma terial selections allow usage in a multitude of various fluids. Optional constructions extend the capability.
Protected Diaphragm Zone:
Internal arrangement isolates the dia phragm from direct impingement, negating any flow induced instability at either low or high flow rates. Allows incorporation of dynamic boost from jet section. Uniformly registers pressure on the diaphragm.
Diaphragm Travel Stops:
Incorporates mechanical stop in spring chamber to limit diaphragm uptravel and in body for downtravel, minimizing po tential int ernal damage from over-travel conditions.
APPLICATIONS
Used primarily in utilities services - saturated steam, superheated steam, industrial gases, fuel oils, compressed air, or water condensate. Also used in sour gas, chemical and other process services.
Standard Technical data
| Regulator Size (Inch) | DIMENSIONS(inch) | Approx. Weight - lbs. | |||||||||||||
| A | B | C | D | E | F | G 1 | G 2 | G 3 | H | J | K | L4 | wo/Flanges | w/Flanges | |
| 1/2" | 5.94 | 10.00 | 1.62 | 5.62 | 3.75 | 3.94 | 10.75 | 11.00 | 13.94 | 3.13 | 11.19 | 11.62 | 5.38 | 18 | 25 |
| 3/4" | 7.12 | 11.25 | 1.75 | 6.56 | 3.81 | 4.00 | 11.88 | 12.25 | 15.12 | 3.13 | 12.25 | 12.81 | 5.62 | 28 | 35 |
| 1" | 7.94 | 11.75 | 2.12 | 7.38 | 4.38 | 4.69 | 13.62 | 14.00 | 15.94 | 3.13 | 12.81 | 13.44 | 6.75 | 37 | 46 |
| 1-1/4" | 8.50 | 12.25 | 2.38 | 8.00 | 4.50 | 5.06 | NA | NA | 16.50 | 4.31 | 13.94 | 14.19 | NA | 48 | N/A |
| 1-1/2" | 9.75 | 15.75 | 2.50 | 9.12 | 6.19 | 5.75 | 15.88 | 16.19 | 17.75 | 4.31 | 16.50 | 17.00 | 7.31 | 77 | 93 |
| 2" | 11.25 | 16.00 | 2.88 | 11.25 | 7.06 | 6.62 | 19.31 | 19.62 | 19.22 | 4.31 | 16.88 | 17.38 | 9.81 | 109 | 131 |
| Regulator Size(DN) | DIMENSIONS - METRIC (mm) | Approx. Weight - kg. | |||||||||||||
| A | B | C | D | E | F | G 1 | G 2 | G 3 | H | J | K | L4 | wo/Flanges | w/Flanges | |
| (15) | 151 | 254 | 41 | 143 | 95 | 100 | 273 | 279 | 354 | 79 | 284 | 295 | 137 | 8 | 11 |
| (20) | 181 | 286 | 44 | 167 | 97 | 102 | 302 | 311 | 384 | 79 | 311 | 325 | 143 | 13 | 16 |
| (25) | 202 | 298 | 54 | 187 | 111 | 119 | 346 | 356 | 405 | 79 | 325 | 341 | 171 | 17 | 21 |
| (32) | 216 | 311 | 60 | 203 | 114 | 129 | NA | NA | 419 | 110 | 354 | 360 | NA | 22 | N/A |
| (40) | 248 | 400 | 64 | 232 | 157 | 146 | 403 | 411 | 451 | 110 | 419 | 432 | 186 | 35 | 42 |
| (50) | 286 | 406 | 73 | 286 | 179 | 168 | 490 | 498 | 488 | 110 | 429 | 441 | 249 | 49 | 59 |
Phone: +86 (0) 755 / 83330270-400
Mobile: +86 (0) 13691839789
Fax: +86 (0)755 / 83330270 - 408
E-Mail: sales@hankchina.com、fang.tong@hankchina.com
URL:www.hankchina.com、www.ksbvalve.com
德国汉克（HANK）成立于1852年创建于门兴格拉德巴赫（Monchengladbach）是位于德国北莱茵-威斯特法伦州首府杜塞尔多夫市以西的一座城市。于19世纪50年代初德国经济快速发展，由于德国能源短缺，政府在节能方面加大力度，因此HANK(Trouble Less valve没有故障的阀门)公司成立。汉克阀门是以生产高品质、先进的泵、阀、管件、测量及控制系统而享誉全球的跨国性生产企业，在全球几十个国家拥有子公司及分支机构，公司产品涉及用途：石油、化工、电力、冶金、制药、食品、水处理、市政给排水、天然气、造纸、电子工业、楼宇、机械设备配套等领域。
GERMANY HANK VALVE LIMITED is founded on 1852 in Monchengladbach,which is located at one city in North Rhine in Germany, which is the west of Nordrhein-Westfalen. At the beginning of 1850s, as the rapid development of economic and the shortages of energy in Germany , the government had been in saving energy aspect. On this occasion, HANK Valve (Trouble Less Valve) was established.Hank valve is the world-famous transnational production enterprise,which produces high quality and advanced valve, measurement and control system, and which has its divisions and branches in dozens of countries in the global. The company products user involves the petroleum, the chemical industry, the electric power, the metallurgy, the drugs manufacture, food, the water treatment, the municipal administration to give draining water, the natural gas, the papermaking, the electronics industry, the building, the mechanical device necessary ect..
德国汉克（HANK）阀门的价值理念概括为：责任－远见－创新。我们因自身的责任感、远见及专注于创造*的解决方案和理念，而成为全球*的阀门制造商。
The conclusion of the valve concept in German Hank valve is resposibility,foresight,innovation. For ourselves resposibility, foresight and focusing on creating unprecendented solution and concept,our company has become the lead of valve manufacturer in the global.
联系方式
公司名称 深圳市凯士比阀门有限公司
联系卖家 方同 
（QQ：1246775303）
（QQ：1246775303） 电话 尋尉尅尅-将専尃專尋将尃專
手机 専將将尊専專將尊尉專尊
传真 尋尉尅尅-将専尃專尋将尃專
地址 广东省深圳市
方同 经理
専將将尊専專將尊尉專尊
立即询价 
扫码查看 扫码查看
手机扫码 快速查看
在线客服 
