东莞市台铭光电科技有限公司
东莞市台铭光电科技有限公司
店龄5年 · 企业认证 · 广东省东莞市
主营产品: 视觉光源led灯珠, 插件led灯珠, 大功率led灯珠, 贴片led灯珠, 红外线发射管, 全光谱植物led灯珠, 红外线接收头有, 0805贴片led灯, 0603贴片led灯, 0402贴片led灯, 1206贴片led灯, 5050贴片led灯, 3535贴片led灯, 5730贴片led灯, 0201贴片led灯, 1615贴片led灯, 小蝴蝶led灯珠, 食人鱼led灯珠, COB 面光源
免费会员
立即询价
进入商铺 手机扫码查看 移动端的落地页
店龄5年 · 企业认证 · 广东省东莞市
㜉㜈㜃㜇㜄㜌㜈㜃㜄㜃㜄
红翠绿双色直插-三脚插件led-共阴共阳3mm发光二极管
价格
订货量(个)
¥0.01
≥3000
店铺主推品 热销潜力款
联系人 陈子华
㜉㜈㜃㜇㜄㜌㜈㜃㜄㜃㜄
发货地 广东省东莞市
在线客服
商品参数
|
商品介绍
|
联系方式
品牌 台铭光电
电流 20mA
电压 1.8-2.4V
发光颜色 红翠绿双色
间距 3mm
封装 1000
型号 TM-L03STRCGDK-E
商品介绍
台铭直插式LED,体积小,高亮度,能耗低,应用于照明,背光,指示等领域。
注:发光颜色、亮度、色温均可按客户要求做货。
Type 规格/型号 | Emitting Color 颜色 | Material 原材料 | View Angle 发光角度 | VF(V) 电压 | IV (MCD) 亮度 | WL(nm) 波长 | IF(MA) 电流 | |||
Typ | Max | Min | Typ | Min | Max | |||||
TM-L03RPG-E (红、黄绿双色) | Red | AlGaInP | 25° | 1.8 | 2.4 | 80 | 120 | 620 | 630 | 20MA |
Yollow Green | AlGaInP | 30 | 60 | 565 | 575 | |||||
TM-L03RB-E (红、蓝双色) | Red | AlGaInP | 25° | 1.8 | 2.4 | 80 | 120 | 620 | 630 | 20MA |
Blue | IGaN/GaN | 2.8 | 3.4 | 80 | 100 | 460 | 475 | |||
TM-L03OCG-E (橙、翠绿双色) | Orange | AlGaInP | 25° | 1.8 | 2.4 | 30 | 60 | 600 | 610 | 20MA |
Green | AlGaInP | 2.8 | 3.4 | 800 | 1500 | 520 | 530 | |||
TM-L03BCG-E (蓝、翠绿双色) | Blue | IGaN/GaN | 25° | 2.8 | 3.4 | 80 | 100 | 460 | 475 | 20MA |
Green | 800 | 1500 | 520 | 530 | ||||||
TM-L03OPG-E (橙、黄绿双色) | Orange | AlGaInP | 25° | 1.8 | 2.4 | 30 | 60 | 600 | 610 | 20MA |
White | IGaN/GaN | 2.8 | 3.4 | 30 | 60 | 565 | 575 |
Supporter shaping:
Shaping of the supporter must be conducted before welding. While shaping, the
bending position of the supporter must at least be located at 3mm from the bottom
of the encapsulating resin. Also, avoid multiple bending on the same position。 Please
choose the
appropriate apparatus to fixate the supporter in order to avoid exerting extra pressure
on resin. Using the jointing section of the pin and resin as fulcrum is strictly
prohibited since the pressure mounted would directly damage the internal 。
illuminating structure and thus cause irreversible defection of the product..Due to the
same reason, the interval between the welding hole on the PCB board should be
strictly matched with the pin interval of the product when assembling the product.
bending position of the supporter must at least be located at 3mm from the bottom
of the encapsulating resin. Also, avoid multiple bending on the same position。 Please
choose the
appropriate apparatus to fixate the supporter in order to avoid exerting extra pressure
on resin. Using the jointing section of the pin and resin as fulcrum is strictly
prohibited since the pressure mounted would directly damage the internal 。
illuminating structure and thus cause irreversible defection of the product..Due to the
same reason, the interval between the welding hole on the PCB board should be
strictly matched with the pin interval of the product when assembling the product.
联系方式
公司名称 东莞市台铭光电科技有限公司
联系卖家 陈子华 (QQ:3191427098)
电话 㜄㜋㜌㜃㜊㜋㜇㜊㜈㜆㜊㜆
手机 㜉㜈㜃㜇㜄㜌㜈㜃㜄㜃㜄
传真 㜄㜋㜌㜃㜊㜋㜇㜊㜈㜆㜊㜆
地址 广东省东莞市