深圳市扎克贸易有限公司
主营产品: 传感器
HCscan-RAILFROG探伤仪旬牙利
价格
订货量(件)
¥1111.00
≥1
店铺主推品 热销潜力款
莸莶莶莹获莹获莾莵莶莵
在线客服
HCscan RAILFROG探伤仪旬牙利
HCscan RAILFROG探伤仪旬牙利
HCscan 铁路&青蛙
手动涡流装置
HC Scan 适用于测量由以下原因引起的钢轨误差:
滚动接触疲劳并用于控制磨削活动
纠正错误。
设备简单方便的设计使得 HC Scan
有效快速检测HC错误并确定
的伤害等级。
HCscan 设备的 RAIL&FROG 版本能够测量
锰道岔零件也是如此。
设备开机后即可运行,需要
只需在运行表面上进行零点调整 – 并且它
以 0.1 毫米的分辨率立即显示 HC 损伤深度。
HCscan RAIL&FROG 零点调整过程中
设备自动识别待加工零件的材质
测量(它改变并显示操作模式)。
设备特点:
• 为普通钢轨和锰材料设置的相位角
• 探头采用陶瓷测量面,保证稳定的物距和耐磨性
• 该设备不需要调整探头距离
• 在未损坏的表面上进行调零(例如在轨道运行表面的顶部)
• 显示探头握持不当的情况
• 用手在待测表面上定向探头
• 显示损坏深度:
• 0 至 3.1 毫米之间:分辨率为 0.1 毫米
• 超过3.1 毫米:“>3.1 毫米”信号
• 根据损伤深度分类进行颜色编码
• 隐藏裂纹角度可调整至损伤深度的计数过程,范围为
5° - 25°(默认值:25°)
• 电源:2节AA电池或蓄电池
• 运行时间:分钟。 10 小时。
选项:蓝牙连接和软件,测量结果以基于时间的图形显示,适用于具有以下功能的设备
Android 汇编语言(智能手机)。
根据全国铁路 HC 错误位置调查结果,我们建议使用 HC Scan 来检测错误
跟踪,用于跟踪损坏变化并控制已执行的修复工作
HCscan RAIL&FROG
hand-operated eddy current device
HC Scan is suitable for measuring the errors of the rails caused by
rolling contact fatigue and for controlling the grinding activity that
corrects the errors.
The simple and expedient design of the device makes the HC Scan
effective for quick detection of the HC errors and determination
of the damage level.
The RAIL&FROG version of the HCscan device is able to measure
manganese turnout parts as well.
The device is ready for operation right after turning on, it requires
only the zero-point adjustment on the running surface – and it
displays immediately the HC damage depth in 0.1 mm resolution.
During the adjustment of the zero-point HCscan RAIL&FROG
device recognizes automatically the material of the parts to be
measured (it changes and displays the mode of operation).
Characteristics of the device:
• phase angles set for normal rail and manganese material
• probe with ceramic measuring surface that ensures the stable object distance and abrasion resistance
• the device does not require probe distance adjustment
• zero point adjustment on undamaged surface (e.g. on the top of the running surface of the rail)
• displaying of the improper holding of the probe
• directing of the probe is executed by hand on the surface to be measured
• display of the damage depth:
• between 0 and 3.1 mm: in 0.1 mm resolution
• over 3.1 mm: “>3.1 mm” signal
• color coding according to the classification of the damage deep
• hidden crack angle adjustment possibility to the counting process of the damage deep, in the range of
5° - 25° (default value: 25°)
• power supply: 2 pieces AA battery or accumulator
• operating time: min. 10 h.
Options: Bluetooth connection and software, measuring results to time based graphic display for devices with
Android assembly language (smart phones).
We suggest HC Scan for detecting errors upon the results of nationwide surveys for HC error places in rail
tracks, for following up of damage changes and for controlling of the executed reparation works