q235b角钢60*60*6金属构件厂房框架角铁-耐腐蚀不易变形
价格
订货量(吨)
¥4900.00
≥4
¥4780.00
≥21
店铺主推品 热销潜力款
祺祷祵祶祴祴祻祻祺祳祵
在线客服
注:关于本产品标题,由于商品标题搜索功能的特性,为方便采购方的购物搜索,所起标题关键词仅适用于搜索功能,不涉及广告宣传和功能描述。
温馨提示:由于现货市场浮动较大,店铺所有规格均为参考价格,具体报价请电议咨询客服13392271867,谢谢!
角钢属建造用碳素结构钢,是简单断面的型钢钢材,主要用于金属构件及厂房的框架等。在使用中要求有较好的可焊性、塑性变形性能及一定的机
械强度。生产角钢的原料钢坯为低碳方钢坯,成品角钢为热轧成形、正火或热轧状态交货。不等边角钢的截面高度按不等边角钢的长边宽来计算。
指断面为角形且两边长不相等的钢材。是角钢中的一种。其边长由25mm×16mm~200mm×l25mm。由热轧轧机轧制而成。一般的不等边角钢规格
为:∠50*32--∠200*125 厚度为4-18mm
角钢又称角铁,是两边垂直成90度直角的钢条,分为等边角钢和不等边角钢;角钢是建筑上建造使用的简单断面型钢钢材,是碳素结构钢;主要用
于金属构件和厂房框架等,这样就要求角钢具有较好的可焊性、可塑变形性及承受一定的机械强度。
角钢的特点
1、精采的焊接机能:可采用所有尺度的焊接体例进行焊接。
2、耐侵蚀性强:耐海洋和侵蚀性工业大气的侵蚀。
3、强度高:拉伸强度和弯曲强度都较高。
Angle steel belongs to the construction of carbon structure steel, is a simple section of the section steel, mainly used for metal components and workshop
frame. Good weldability, plastic deformation performance and a certain mechanical strength are required in use. The raw material billet of Angle steel is low
carbon square billet, and the finished Angle steel is hot rolled formed, hot or hot rolled state for delivery. The section height of unequal Angle steel is
calculated according to the length and side width of unequal Angle steel. Refers to the steel material with angular section and unequal length on both sides. Is
one kind of Angle steel. Its side length is from 25mm 16 mm to 200 mml25mm. Mled by a hot rolling mill. The general specification of unequal corner steel is:
50 * 32- -200 * 125 thickness is 4-18mm
Angle steel, also known as Angle iron, is the sides of 90 degrees right steel bar, divided into equal Angle steel and unequal Angle steel; Angle steel is a simple
section steel, carbon structure steel; mainly used for metal components and plant frame, so that Angle steel has good soldability, plastic deformation and
bear a certain mechanical strength.
The characteristics of Angle steel
1, excellent welding machine: can use all scales of welding body for welding.
2, strong erosion resistance: resistance to Marine and erosive industrial atmosphere erosion.
3, high strength: the tensile strength and bending strength are higher.