找商网手机端:m.zhaosw.com
深圳市龙岗区平湖泰利信电子经营部
主营产品: 网络分析仪
잵잰잲잭잲잳잰잰잭잴잮
TEC温度控制器-湖北MODEL-6000温度控制器
价格
订货量(台)
¥18000.00
≥1
店铺主推品 热销潜力款
联系人 李万来
잵잰잲잭잲잳잰잰잭잴잮
发货地 广东省深圳市
在线客服
商品参数
|
商品介绍
|
联系方式
品牌 NEWPORT
名称 TEC控制器
型号 NEWPORT 9016
电压 220V
显示 LCD
用途 光通信测试
应用 半导体测试
产地 美国
服务方式 租赁、出售
是否提供维修 是
是否定制 否
是否回收 是
兼容 NEWPORT9008
新旧 8成新
商品介绍
The Models 8008, 8016, 9008 and 9016 Modular Controllers expand on Newport's modular laser diode controller concept to meet the higher channel densities found in Dense WDM (DWDM) applications and 2-D VCSEL arrays where all the lasers have similar electrical configurations. The eight or sixteen bays accept an array of LDD, TEC, and LDD/TEC combo modules.
The mainframe automatically detects which module is installed in each bay and displays the system configuration on a large LCD screen. A sophisticated processor provides enhanced system control and data collection capabilities.
GPIB/IEEE-488 and RS-232C interfaces are included with the High-Density Laser Diode Controller Models for complete remote control and data collection.
The 5305 offers excellent short-term and long-term stability. At less than 0.004°C stability over one hour, and 0.01°C over 24 hours, the 5305 provides an excellent solution for precision temperature control.
Fully Adjustable PID
The 5305 comes with eight factory set gain settings for the temperature control loop, which are sufficient for most applications, but also offers fully adjustable PID settings, allowing you to fine-tune the response of the instrument. Also, because the loop is digital and uses the temperature (not sensor resistance) as the control variable, variations in sensor sensitivity across temperature (primarily seen with thermistors) does not affect the unit as it does with analog-based PID loops.
Integrated Fan Supply
The 5305 includes an adjustable 4.5V to 12VDC power supply for power external fans, such as those on our 240 and 260 Series LaserMounts. By incorporating the power supply, it eliminates the need for an external power supply and simplifies cabling to the mount. If you will be using this power supply, make sure you choose
AutoTune automatic PID
60W of TEC power
0.004°C stability
Bi-polar output: heat & cool
Thermistor, RTD, LM335, & AD590 sensors
4-wire RTD mode
his Newport ESP300-111111 Motion Controller/Driver is used and in excellent condition.
Configuration:
• 3 Driver Cards Installed: Part Number: 36979-01
• Display Option: Front Panel Display
• (1) IEEE-488 (GPIB) Option
• Power Supply Option: 150 W
Input Voltage: 100-240 V
Features:
Integrated Controller and Driver Design
Compact, Standard 2U Height, Rack Mountable or Bench-Top Enclosure
Allows Any Combination of Motor Types (2-Phase Stepper and Brush DC) Up to 3A, 48V per Axis
Digital Signal Processing Architecture
Real-Time High Speed Command Processing
Motion Program Storage (up to 99 Programs) in 64kB Non-Volatile Memory
The Newport ESP300 Motion Controller/Driver System consists of the ESP300 Controller/Driver and ESP-compatible stages. The ESP300 is an advanced stand-alone controller with integrated motor drivers. It can control and drive up to 3 axes of motion in any stepper and DC motor configuration.
The ESP plug-and-play concept significantly increases user friendliness and improves overall motion performance.
The ESP300 is used as a stand-alone controller to drive an ESP motion device. All components are designed for optimal performance.
Newport ESP301-3G 3-Axis Motor Controller / Driver
This Newport ESP301-3G 3-Axis Motor Controller / Driver is used and in excellent condition.
Configuration:
• Number of Axis: 3
• Computer Interfaces: USB, GPIB
Features:
Plug-and-Play with ESP Compatible Stages
Cost Effective and Space Saving
Compact, Standard 2U Height Rack Mountable or Bench-Top Enclosure
200MHz Digital Signal Processing Architecture
Real-Time High Speed Command Processing
he 505B Laser Diode Driver offers all the performance of the most advanced laser diode controllers for a fraction of the price. Quiet and stable 200 or 500 mA current driver for use in the most demanding applications, such as spectroscopy and fiber optic communications. Intuitive front panel controls make this instrument extremely simple to use. There are two operating modes: constant current or constant laser power.
Dual current-level selection lets you optimize current resolution settings by precisely varying the output to the laser diode. Comprehensive laser diode safety features are built-in including redundant FET and relay shorting circuits to protect the laser diode at the beginning of the slow turn-on sequence. The current limit setting is fully independent.
External analog modulation allows you to voltage-control or modulate the output. USB interface.
The mainframe automatically detects which module is installed in each bay and displays the system configuration on a large LCD screen. A sophisticated processor provides enhanced system control and data collection capabilities.
GPIB/IEEE-488 and RS-232C interfaces are included with the High-Density Laser Diode Controller Models for complete remote control and data collection.
The 5305 offers excellent short-term and long-term stability. At less than 0.004°C stability over one hour, and 0.01°C over 24 hours, the 5305 provides an excellent solution for precision temperature control.
Fully Adjustable PID
The 5305 comes with eight factory set gain settings for the temperature control loop, which are sufficient for most applications, but also offers fully adjustable PID settings, allowing you to fine-tune the response of the instrument. Also, because the loop is digital and uses the temperature (not sensor resistance) as the control variable, variations in sensor sensitivity across temperature (primarily seen with thermistors) does not affect the unit as it does with analog-based PID loops.
Integrated Fan Supply
The 5305 includes an adjustable 4.5V to 12VDC power supply for power external fans, such as those on our 240 and 260 Series LaserMounts. By incorporating the power supply, it eliminates the need for an external power supply and simplifies cabling to the mount. If you will be using this power supply, make sure you choose
AutoTune automatic PID
60W of TEC power
0.004°C stability
Bi-polar output: heat & cool
Thermistor, RTD, LM335, & AD590 sensors
4-wire RTD mode
his Newport ESP300-111111 Motion Controller/Driver is used and in excellent condition.
Configuration:
• 3 Driver Cards Installed: Part Number: 36979-01
• Display Option: Front Panel Display
• (1) IEEE-488 (GPIB) Option
• Power Supply Option: 150 W
Input Voltage: 100-240 V
Features:
Integrated Controller and Driver Design
Compact, Standard 2U Height, Rack Mountable or Bench-Top Enclosure
Allows Any Combination of Motor Types (2-Phase Stepper and Brush DC) Up to 3A, 48V per Axis
Digital Signal Processing Architecture
Real-Time High Speed Command Processing
Motion Program Storage (up to 99 Programs) in 64kB Non-Volatile Memory
The Newport ESP300 Motion Controller/Driver System consists of the ESP300 Controller/Driver and ESP-compatible stages. The ESP300 is an advanced stand-alone controller with integrated motor drivers. It can control and drive up to 3 axes of motion in any stepper and DC motor configuration.
The ESP plug-and-play concept significantly increases user friendliness and improves overall motion performance.
The ESP300 is used as a stand-alone controller to drive an ESP motion device. All components are designed for optimal performance.
Newport ESP301-3G 3-Axis Motor Controller / Driver
This Newport ESP301-3G 3-Axis Motor Controller / Driver is used and in excellent condition.
Configuration:
• Number of Axis: 3
• Computer Interfaces: USB, GPIB
Features:
Plug-and-Play with ESP Compatible Stages
Cost Effective and Space Saving
Compact, Standard 2U Height Rack Mountable or Bench-Top Enclosure
200MHz Digital Signal Processing Architecture
Real-Time High Speed Command Processing
he 505B Laser Diode Driver offers all the performance of the most advanced laser diode controllers for a fraction of the price. Quiet and stable 200 or 500 mA current driver for use in the most demanding applications, such as spectroscopy and fiber optic communications. Intuitive front panel controls make this instrument extremely simple to use. There are two operating modes: constant current or constant laser power.
Dual current-level selection lets you optimize current resolution settings by precisely varying the output to the laser diode. Comprehensive laser diode safety features are built-in including redundant FET and relay shorting circuits to protect the laser diode at the beginning of the slow turn-on sequence. The current limit setting is fully independent.
External analog modulation allows you to voltage-control or modulate the output. USB interface.
联系方式
公司名称 深圳市龙岗区平湖泰利信电子经营部
联系卖家 李万来 (QQ:674144714)
手机 잵잰잲잭잲잳잰잰잭잴잮
地址 广东省深圳市