这PXIe-8381(零件号:782362-01)是高级的PXI遥控模块 从民族乐器。本模块 允许用户从PC上控制PXI和CompactPCI系统。这镍PXIe-8381安装在PXI底盘上。该模块使用PCI Express-to-PCI桥与已安装的PCIe-8381接口。接口需要一根x1 MXI高速铜缆。这PXIe-8381也可以使用PXIe-8384创建多机箱系统。这镍PXIe-8381模块可以配置一个完整的PXI系统。

这国家文书PXIe-8381遥控模块使用x8第二代MXI高速链路将PXI高速机箱连接到台式机。用户也可以将测量或自动化系统与主机PC分开。可以用一台PC或控制器控制多个机箱。该模块使用完全透明的MXI快速链接。对于有线链路，所有PXI和PXIe模块都显示为计算机内部的PCI板。它提供高带宽和低延迟。该链路可以在每个方向上同时以4 GBps的速率传输数据。

的设计PXIe-8381与各种商用电脑兼容。的驱动程序镍PXIe-8381遥控模块Windows XP/Vista/7/8支持。NI MXI-Express BIOS兼容软件解决了常见的PC限制。这些限制与枚举复杂的PCI Express拓扑有关。这PXIe-8381与PXI快速硬件规范版本2.0兼容。这镍PXIe-8381还支持PICMG compact PCI Express exp . 0r 2.0。该模块的工作温度范围为0°C至55°C。

The PXIe-8381 (Part Number: 782362-01) is an advanced PXI Remote Control Module from National Instruments. This module allows the user to control PXI and CompactPCI systems from a PC. The NI PXIe-8381 is installed in a PXI chassis. The module uses a PCI Express-to-PCI bridge to interface with an installed PCIe-8381. A copper, x1, MXI-Express cable is required for the interface. The PXIe-8381 can also create a multi-chassis system using the PXIe-8384. The NI PXIe-8381 module can configure a complete PXI system.

The National Instruments PXIe-8381 Remote Control Module uses x8 Gen 2 MXI-Express links to connect a PXI Express chassis to desktop PCs. The user can also separate the measurement or automation system from a host PC. Multiple chassis can be controlled with a single PC or controller. This module uses a fully transparent MXI-Express link. For a cabled link, all PXI and PXIe modules appear as PCI boards within the computer itself. It offers high bandwidth and low latency. The link can transmit data at a rate of 4 GBps in each direction simultaneously.

The design of the PXIe-8381 is compatible with various commercially available PCs. The driver for the NI PXIe-8381 Remote Control Module is supported for Windows XP/Vista/7/8. NI MXI-Express BIOS Compatibility Software addresses common PC limitations. These limitations are related to enumerating complex PCI Express topologies. The PXIe-8381 is compatible with the PXI Express Hardware Specifications, Revision 2.0. The NI PXIe-8381 also supports PICMG CompactPCI Express EXP.0 R2.0. The module is designed to withstand an operating temperature range of 0 °C to 55°C.