200350和200355加速计

恒流压电加速度计

我们的200350和200355加速计适用于通用机械的状态监测。

200350已通过北美和欧洲标准CSA、ATEX和IECEx认证，可用于危险区域。其灵敏度为100 mV/g±20%，频率范围为0.5 Hz至10 kHz。

200355的灵敏度公差为100 mV/g±5%，频率范围为0.2 Hz至10 kHz。200355未被批准用于危险区域。

200350和200355型号的最大振幅均为50克峰值。

产品特点：

安装在43217（标准）或37442（高温）外壳中，以防止不利环境条件。将加速计安装在受监控部件的表面，以获得最佳的频率响应。

三条互连电缆，加速计端带有螺纹内螺纹连接器，监视器端带有接线片。适用于大多数安装的标准电缆。标准电缆长度从6英尺（1.8米）到99英尺（30米）不等。非标准长度可作为自定义选项提供。

200350 and 200355 Accelerometers

Constant-Current Piezoelectric Accelerometers

Our 200350 and 200355 Accelerometers are appropriate for condition monitoring of general purpose machinery.

The 200350 is certified for use in hazardous areas by the North American and European standards CSA, ATEX and IECEx.  Its sensitivity is 100 mV/g ±20% with a frequency range of 0.5 Hz to 10 kHz.

The 200355 offers a tighter tolerance on sensitivity of 100 mV/g ±5% and a frequency range that extends to a lower frequency of 0.2 Hz to 10 kHz. The 200355 is not approved for use in hazardous areas.

The 200350 and 200355 models both accommodate a maximum amplitude of 50 g peak.

Product Features：

Installed in 43217 (standard) or 37442 (high-temperature) housings to protect against adverse environmental conditions. Mounts the accelerometer onto the surface of the monitored component for optimal frequency response.

Three interconnect cables available with a threaded female connector at the accelerometer end and terminal lugs at the monitor end. Standard cable suitable for most installations. Standard cable lengths range from 6 ft (1.8 m) to 99 ft (30 m). Non-standard lengths available as custom options.