高密市金顺水利机械厂
主营产品: 其他排灌机械
水利现浇U型槽厂-水泥现浇U型槽购买-金顺
价格
订货量(台)
¥10000.00
≥1
店铺主推品 热销潜力款
憩憦憤憤憭憫憬憩憫憬憦
世界互联网大会U型槽设备必须结合互联网进行发展
第二届世界互联网大会让古老的江南水乡小镇,成为全世界的目光焦点。在2000多位嘉宾中,有600多位互联网企业人物、互联网名人、学者,涉及网络空间各个领域。
在互联网飞速发展的当今社会,作为实体企业的我们生产的U型槽设备将结合线上线下的发展模式,把网上销售做起来。我们将再接再厉将互联网+真真正正的做起来!
U型槽设备模具在雾霾中勇敢前行
U型槽设备模具是目前市面上常见钢模具之一,对模具市场起到举足轻重的作用。U型槽模具按照材质分,主要分为两种,一种是塑料材质,一种是钢铁材质。有一些常规尺寸的材质是塑料模具,这些常规尺寸的u型槽塑料模具能够大批量生产,产品质量统一,型号标准。有些特殊型号可以定制生产u型槽钢模具,包括一些超大型的尺寸,这样生产钢模具可以方便拆卸和安装。在生产u型槽水泥制品时,可以很快速的成型。
模具生产过程中需要大量的产能输出。在如今环保的重压之下,u型槽模具在生产时要注意环保的政策。U型槽模具在雾霾中勇敢前行。
U型槽工艺流程:
U groove process flow:
1.基面清理。
1. base surface cleaning.
2.批益胶泥、粘贴网格布。
2. batch of beneficial glue and stickup mesh.
3.弹线分格,贴泡沫胶带,泡沫胶带选择宽度1.5cm,厚度0.3cm左右。
The 3. line is divided, the foam tape is attached, the choice width of the foam tape is 1.5cm, and the thickness is about 0.3cm.
4.批刮一道腻子,与胶带平齐,待腻子干后,撕去胶带。
The 4. batch of the first putty, flat with the tape, and tearing off the tape after the putty is dry.
5.在一道腻子的基础上批第二道腻子,把缝批平,接着用直径1.5cm左右的PVC管沿着线槽拉出U型分割槽。
5. on the basis of the first putty, the second pass putty was batched, and the seam was leveled, and then the PVC pipe was pulled out of the slot of the U type along the line slot with the diameter of 1.5cm.