预制隔离带模具—水泥隔离带模具—隔离带模具—宏旭模具一般设置在公路的车行道路、人行道路、速公路、停车场等地。那么预制隔离带模具—水泥隔离带模具—隔离带模具—宏旭模具主要在哪里，隔离墩模具自从被用作交通平安设施后。有什么用呢?人行道设置：人行道设置的隔离设施起保护行人在人行道上有秩序地活动，并有防止行人任意步入和横穿车行道的作用。人行道隔离设施的形式主要是绿化分隔带和人行道护栏。市区范围内，人行道宽度大于2.5m时，优先选取的形式依次为绿化分隔带、人行道护栏，当人行道宽度不大于2.5m时，人行道隔离设施应选择设置人行道护栏。车行道设置：车行道隔离设施是用来分隔对向或同向行驶的交通流，并有禁止车辆左转进出行驶和行人任意穿越道路的作用，一般设置在道路中心线上或车道分隔线上。车行道隔离设施分为车行道中心隔离设施(分隔对向)和车行道分界隔离设施(分隔同向)车行道隔离设施主要采用三种形式：绿化分隔带、隔离护栏、混凝土防撞墙。Prefabricated isolation belt mold - cement isolation belt mold - isolation belt mold - Hongxu mold is generally set up in the vehicle road, pedestrian road, expressway, parking lot and other places of the highway. Where are the prefabricated isolation belt molds - cement isolation belt molds - isolation belt molds - Hongxu molds? Since the isolation pier molds have been used as traffic safety facilities. What's the use? Sidewalk setting: the isolation facilities set on the sidewalk can protect pedestrians from moving orderly on the sidewalk and prevent pedestrians from entering and crossing the roadway arbitrarily. Sidewalk isolation facilities are mainly in the form of green separation belt and sidewalk guardrail. Within the urban area, when the sidewalk width is greater than 2.5m, the preferred forms are green separation belt and sidewalk guardrail. When the sidewalk width is not greater than 2.5m, sidewalk guardrail shall be set for sidewalk isolation facilities. Roadway setting: roadway isolation facilities are used to separate the traffic flow in opposite or same direction, and prohibit vehicles from turning left in and out and pedestrians from crossing the road arbitrarily. They are generally set on the road center line or lane separation line. Roadway isolation facilities are divided into roadway center isolation facilities (separation opposite direction) and roadway boundary isolation facilities (separation in the same direction). Roadway isolation facilities mainly adopt three forms: green separation belt, isolation guardrail and concrete anti-collision wall.