进口高粘度电磁阀德国洛克品牌全国畅销
价格
订货量(台)
¥2600.00
≥1
店铺主推品 热销潜力款
ῡ῟ῢῨΰῡῢῤῥῢῤ
在线客服
进口高粘度电磁阀德国洛克品牌全国畅销
进口高粘度电磁阀优点:
1、电磁阀内部组件均为不锈钢制造,采用数控加工中心制成,控制尺寸精度高,产品互换性好。
2、活塞环采用耐磨特殊材料,伸展自如,不会被介质中的杂质卡死,具有自动间隙补偿功能,动密封性能高。
3、金属活塞与金属阀腔不产生直接摩擦,活塞寿命增长,可连续动作百万次以上。
4、阀体的安装方位不受限制,垂直、水平、倾斜都可以。
5、专制线圈,线圈不易烧毁。合理的密封结构,密封性能更好。
6、长期停止动作后的重新启动,动作同样灵敏。
进口高粘度电磁阀工作原理:
常闭:当线圈通电时,先导阀芯吸合,先导孔打开,阀上腔卸压,活塞靠下腔介质压力推动,电磁阀打开当线圈断电时,先导阀芯靠弹簧复位,先导孔关闭,阀腔由活塞节流孔增压和复位弹簧的推力,电磁阀关闭。
常开:当线圈通电时,先导孔关闭,阀上腔由活塞节流孔增压和复位弹簧的推力,电磁阀关闭。当线圈断电时,先导阀芯靠弹簧复位,先导孔打开,阀上腔卸压,活塞靠下腔介质压力推动,电磁阀打开。
Working principle of imported high viscosity solenoid valve:
Normally closed: when the coil is powered on, the pilot valve core is closed, the pilot hole is opened, the pressure in the upper chamber of the valve is relieved, the piston is pushed by the medium pressure in the lower chamber, and the solenoid valve is opened. When the coil is powered off, the pilot valve core is reset by the spring, the pilot hole is closed, the valve chamber is pressurized by the piston orifice and the thrust of the reset spring, and the solenoid valve is closed.
Normally open: when the coil is energized, the pilot hole is closed, the upper chamber of the valve is pressurized by the piston orifice and the thrust of the return spring, and the solenoid valve is closed. When the coil is powered off, the pilot valve core is reset by the spring, the pilot hole is opened, the pressure in the upper chamber of the valve is relieved, the piston is pushed by the medium pressure in the lower chamber, and the solenoid valve is opened.
进口高粘度电磁阀描述:
德国《DE LOCKE》洛克进口高粘度电磁阀(High viscosity solenoid valve ),驱动方式可xuan用电磁,连接方式可xuan用法兰,螺纹,结构形式可xuan用活塞式,先导式,直动式,密封结构可xuan用活塞式,压力范围PN1.6-100MPa,公称通径为DN1-500mm,材质可xuan用304,316,钛合金钢等。由于阀门的使用范围非常的广泛,同一种阀门在不同的场合与工况有不同的搭配,如果您是非专业人士,欢迎您向本公司来电咨询。本公司有专业技术人员为您服务!
Description of imported high viscosity solenoid valve:
German "de Locke" imported high viscosity solenoid valve, drive mode can use electromagnetic, connection mode can use flange, thread, structure can use piston type, pilot type, direct acting, sealing structure can use piston type, pressure range pn1.6-100mpa, nominal diameter DN 1-500mm, material can use 304316, titanium alloy steel, etc. As the valve is widely used, the same kind of valve has different matching in different occasions and working conditions. If you are a non professional, you are welcome to contact our company. The company has professional and technical personnel to serve you!
进口高粘度电磁阀技术参数:
公称通径 | DN6~300mm |
原理结构 | 分步两次直动导向活塞式 |
环境温度 | -10~+50℃ -40~+80℃ |
线圈温度 | <+50℃、<+85℃ |
控制方式 | 常闭、常开、自保持 |
公称压力 | 0~160Mpa |
阀体材质 | 铸钢、不锈钢304、316 |
适用介质 | 气、水、油、蒸汽、燃气、腐蚀性流体 |
介质温度 | -40~+300℃ |
介质粘度 | 小于50CSt (大于50时需定制) |
防护性能 | 防水、防尘、防爆(Exd IICT5)、防腐 |
阀芯材质 | 均为不锈钢 |
接线方式 | 接线座式、引线式、插头式 |
电源电压 | DC12、DC24V、DC36V、DC110V、DC127V、DC220V、DC380V; AC24V、AC36、AC110V、AC127V、AC220V、AC380V |
连接方式 | 法兰、内螺纹、外螺纹、卡套、焊接 |
泄 漏 量 | 零泄漏 |
备 注 | 特殊型可定制 |
Technical parameters of imported high viscosity solenoid valve:
Nominal diameter:DN6~300mm
Principle structure:Step by step two times direct action guide piston type
ambient temperature:-10~+50℃ -40~+80℃
Coil temperature:<+50℃、<+85℃
control mode:Normally closed, normally open, self retaining