进口内螺纹高压电磁阀德国洛克品牌产品列表

 

进口内螺纹高压电磁阀工作原理：

常闭：当线圈通电时，先导阀芯吸合，先导孔打开，阀上腔卸压，活塞靠下腔介质压力推动，电磁阀打开；当线圈断电时，先导阀芯靠弹簧复位，先导孔关闭，阀腔由活塞节流孔增压和复位弹簧的推力，电磁阀关闭。

常开：当线圈通电时，先导孔关闭，阀上腔由活塞节流孔增压和复位弹簧的推力，电磁阀关闭。当线圈断电时，先导阀芯靠弹簧复位，先导孔打开，阀上腔卸压，活塞靠下腔介质压力推动，电磁阀打开。

 

进口内螺纹高压电磁阀技术参数：

公称通径：DN1～100mm

原理结构：先导活塞式

工作环境温度：-10～+50℃ -40～+80℃

线圈工作温度： <+50℃、<+85℃

控制方式：常闭、常开、自保持

流通流体压力： 0.1～200Mpa

阀体材质：铸钢、不锈钢304、316。

适用介质：气、水、油、蒸汽、燃气、腐蚀性流体。

介质温度：-200～+450℃。

介质粘度：小于50CSt （大于50时需定制）。

防护性能：防水、防尘、防爆（Exd IICT5）、防腐。

阀芯材质： 均为不锈钢。

接线方式：接线座式、引线式、插头式。

电源电压：DC12、DC24V、DC36V、DC110V、DC127V、DC220V、DC380V；

AC24V、AC36、AC110V、AC127V、AC220V、AC380V。

连接方式：内螺纹

泄 漏 量：零

备 注：特殊型可定制。

Technical parameters of imported internal thread high pressure solenoid valve:
Nominal diameter: DN 1 ～ 100 mm
Principle and structure: pilot piston type
Working environment temperature: - 10 ～ + 50 ℃ - 40 ～ + 80 ℃
Coil working temperature: < + 50 ℃ and < + 85 ℃
Control mode: normally closed, normally open, self holdin
Circulating fluid pressure: 0.1 ~ 200MPa
Valve body material: cast steel, stainless steel 304, 316.
Applicable media: gas, water, oil, steam, gas, corrosive fluid.
Medium temperature: - 200 ～ + 450 ℃.
Medium viscosity: less than 50cst (customized when more than 50).
Protection performance: waterproof, dustproof, explosion-proof (Exd iict5), anti-corrosion.
Material of valve core: stainless steel.
Wiring mode: wiring base type, lead type, plug type.
Power supply voltage: DC12, DC24 V, dc36 V, dc110 V, dc127 V, DC220 V, dc380 V;
AC24V、AC36、AC110V、AC127V、AC220V、AC380V。
Connection mode: internal thread
Leakage: Zero
Note: special type can be customized.
 

进口内螺纹高压电磁阀描述：

德国《DE LOCKE》洛克进口内螺纹高压电磁阀阀芯均为不锈钢活塞式，活塞环不会被介质中的杂质卡死，动密封性能高,寿命长；活塞与金属阀腔不产生直接摩擦，阀体安装向无限制；专制线圈，不易烧毁；长时间停止动作重新启动，动作同样灵敏；zui低启动工作压力0.5MPa。

广泛应用在航天、船舶重工、石油化工、给排水、消防设备、食品医疗设备、清洗设备、景观喷灌、加湿设备、液压设备、测试设备、水厂等,工作压力在6.4---100MPa的管道系统中。

Description of inlet internal thread high pressure solenoid valve:
The valve cores of the high pressure solenoid valve with internal thread imported from Germany "de Locke" are all stainless steel piston type, the piston ring will not be stuck by impurities in the medium, and the dynamic sealing performance is high, Long service life; no direct friction between piston and metal valve chamber, unlimited installation direction of valve body; autocratic coil, not easy to burn; long time stop action and restart, action is also sensitive; Zui low start working pressure 0.5MPa.
It is widely used in aerospace, shipbuilding industry, petrochemical industry, water supply and drainage, fire fighting equipment, food and medical equipment, cleaning equipment, landscape sprinkler irrigation, humidification equipment, hydraulic equipment, testing equipment, water plant, etc., with working pressure of 6.4-100mpa.

 

进口内螺纹高压电磁阀结构特点：

1、电磁阀内部组件均为不锈钢制造，采用数控加工中心制成，控制尺寸精度高，产品互换性好。

2、活塞环采用耐磨特殊材料，伸展自如，不会被介质中的杂质卡死，具有自动间隙补偿功能，动密封性能高。

3、金属活塞与金属阀腔不产生直接摩擦，活塞寿命增长，可连续动作百万次以上。

4、阀体的安装方位不受限制，垂直、水平、倾斜都可以。

5、专制线圈，线圈不易烧毁。合理的密封结构，密封性能更好。

6、长期停止动作后的重新启动，动作同样灵敏。

Structure features of imported internal thread high pressure solenoid valve:
1. The internal components of the solenoid valve are all made of stainless steel and made of CNC machining center, with high precision and good interchangeability.
2. The piston ring is made of special wear-resistant material, which can stretch freely and will not be stuck by impurities in the medium. It has automatic clearance compensation function and high dynamic sealing performance.
3. There is no direct friction between the metal piston and the metal valve cavity, the service life of the piston increases, and the piston can move continuously for more than one million times.
4. The installation position of the valve body is not limited, vertical, horizontal and inclined.
5. Autocratic coil, coil is not easy to burn. Reasonable sealing structure, better sealing performance.
6. After a long-term stop action, restart, action is also sensitive.
 

进口内螺纹高压电磁阀订货须知：

A、若订货前还未选定型号，请向我们提供您的使用参数:

1.公称通径 2.产品型号 3.流体性质（包括公称压力、温度、介质） 4.阀体、密封材料 5.连接方式

B、若已经由设计单位选定我公司的产品型号，请按型号直接向我司销售部订购

C、当使用的场合非常重要或管路比较复杂时，请您尽量提供设计图纸和详细参数，由我们德国洛克阀门技术员为您审核把关。

D、感谢您访问我公司的网站〖〗，如有任何疑问.

您可以致电给我们《》我们一定会尽心尽力为您提供优质的服务!