进口三阀组德国洛克广东地区畅销

 

一、进口三阀组结构作用：

三阀组是在安装和撤除的时候,需要用到平衡阀.否则,差压的量程一般很小,如果厂家的过载能力不强,很容易损坏,在流量传感器仪表接入工艺管道时要用“三阀组”，作用是：

1、在管道由初始状态（空）加入介质时，传感器两侧压力会突然变化，压差增大，为避免，应先关闭传感器两侧的阀A、B，打开旁通阀C；

2、在介质充满管道，并趋近平稳、平衡后，逐渐打开A、B，使传感器两侧均匀施加压力；

3、*关闭阀C，传感器开始正常工作；

4、关闭顺序与上述情况相反。此外，三阀组还有其它作用，如运行一段时间后清洗管道，传感器部分不受影响（管路被旁通）

 

二、进口三阀组描述：

德国《DE LOCKE》洛克进口三阀组可配接：3051、3095、1151、EJA、FX-2、FCX-A/C及霍尼韦尔ST3000系列等变送器,由阀体、二个截止阀及一个平衡阀组成,差压变送器投入运行时的操作程序,打开差压变送器上两个排污阀，而后打开平衡阀，再慢慢打开二个截止阀，将导压管内的空气或污物排除掉,关闭二个排污阀，再关闭平衡阀，变送器即可投入运行。 差压变送器零点在线校验操作程序：先打开平衡阀，关闭二个截止阀，即可对变送器进行零点校验。

 

产品名称 进口三组阀

产品型号 DE LOCKE

产品品牌 德国《DE LOCKE》洛克

产品包装 木箱

驱动方式 手动

公称通径 DN10～DN15

连接方式 螺纹、焊接、卡套

公称压力 PN1.6-32.0Mpa

结构形式 截门形

适用温度 ≤180℃

阀体材质 不锈钢、合金钢

制造标准 德国洛克原厂标准

适用介质 气体、液体及蒸汽等

应用场合 电站、冶金、建筑、锅炉、设备、管道、热能、空调、消防、给排水、水处理、石油化工、造纸印刷厂。

产品报价 面议，电议

产品产地 德国

生产厂家 德国洛克阀门国际集团

*代理 莱恩泵阀制造（珠海）有限公司

 

三、进口三阀组订货须知：

A、若订货前还未选定型号，请向我们提供您的使用参数:

1.公称通径 2.产品型号 3.流体性质（包括公称压力、温度、介质） 4.阀体、密封材料 5.连接方式

B、若已经由设计单位选定我公司的产品型号，请按型号直接向我司销售部订购

C、当使用的场合非常重要或管路比较复杂时，请您尽量提供设计图纸和详细参数，由我们德国洛克阀门技术员为您审核把关。

D、感谢您访问我公司的网站，如有任何疑问.

您可以致电给我们《》我们一定会尽心尽力为您提供优质的服务!

Inlet three valve manifold

一、 The structure and function of imported three valve manifold are as follows:
The three valve group needs to use the balance valve when installing and removing. Otherwise, the range of differential pressure is generally small. If the overload capacity of the manufacturer is not strong, it is easy to damage. When the flow sensor instrument is connected to the process pipeline, the "three valve group" should be used. Its function is to:

1. When the medium is added into the pipeline from the initial state (empty), the pressure on both sides of the sensor will change suddenly, and the pressure difference will increase. To avoid this, the valves a and B on both sides of the sensor should be closed first, and the bypass valve C should be opened;
2. After the medium fills the pipe and approaches stable and balanced, gradually open a and B to apply pressure evenly on both sides of the sensor;
3. Finally, close the valve C and the sensor starts to work normally;
4. The closing sequence is the reverse of the above. In addition, the three valve group has other functions, such as cleaning the pipeline after a period of operation, and the sensor part is not affected (the pipeline is bypassed)

二、 Description of inlet three valve manifold:
The imported three valve manifold of German "de Locke" can be matched with: 3051, 3095, 1151, EJA, FX-2, fcx-a / C and Honeywell ST3000 series transmitters, which are composed of valve body, two stop valves and one balance valve. The operation procedure of differential pressure transmitter when put into operation, Open the two blowdown valves on the differential pressure transmitter, then open the balance valve, and then slowly open the two stop valves to remove the air or dirt in the pressure pipe, close the two blowdown valves, and then close the balance valve, and the transmitter can be put into operation. Differential pressure transmitter Zero online calibration operation procedure: first open the balance valve, close the two stop valves, then the transmitter zero calibration.

Product Name: imported three group valve
Product model De lock
Product brand German "de lock"
Wooden case for product packaging
Drive mode manual
Nominal diameter: DN 10 ～ DN 15
Connection mode: thread, welding and ferrule
Nominal pressure pn1.6-32.0mpa
Structural form
Applicable temperature ≤ 180 ℃
The valve body is made of stainless steel and alloy steel
Manufacturing standard German original standard
Suitable for medium gas, liquid and steam, etc
Applications: power station, metallurgy, construction, boiler, equipment, pipeline, heat energy, air conditioning, fire protection, water supply and drainage, water treatment, petrochemical, paper and printing plant.
The product quotation is discussed by face to face and by cable
Product origin: Germany
Manufacturer: rockvalve International Group
Designated agent: lain pump valve manufacturing (Zhuhai) Co., Ltd

三、 Instructions for ordering imported three valve manifold:
A. If the model has not been selected before ordering, please provide us with your parameters:
1. Nominal diameter 2. Product model 3. Fluid properties (including nominal pressure, temperature and medium) 4. Valve body and sealing material 5. Connection mode
B. If the product model of our company has been selected by the design unit, please order directly from our sales department according to the model
C. When the use of the occasion is very important or the pipeline is more complex, please try to provide design drawings and detailed parameters, and our German Rockwell valve technician will check for you.
D. Thank you for visiting our website. If you have any questions
You can call us, we will try our best to provide you with high quality service!