进口带信号反馈电磁阀德国洛克长期供应
进口带信号反馈电磁阀德国洛克长期供应
进口带信号反馈电磁阀德国洛克长期供应
进口带信号反馈电磁阀德国洛克长期供应
进口带信号反馈电磁阀德国洛克长期供应
进口带信号反馈电磁阀德国洛克长期供应

进口带信号反馈电磁阀德国洛克长期供应

价格

订货量(台)

¥2600.00

≥1

联系人 叶工

専將專尃射専專尅尊專尅

发货地 广东省珠海市
立即询价 进入商铺
扫码查看

扫码查看

手机扫码 快速查看

在线客服

商品参数
|
商品介绍
|
联系方式
品牌 德国洛克
型号 DE LOCKE
驱动方式 电磁
介质温度 -20~+100℃℃
工作压差 0.02~15Mpa
适用介质
压力环境 常压
货号 20204201
用途 开关
外型尺寸 中型
商品介绍
基本信息
品牌:德国洛克
型号:DE LOCKE
驱动方式:电磁
介质温度:-20~+100℃℃
工作压差:0.02~15Mpa
适用介质:
压力环境:常压
货号:20204201
用途:开关
外型尺寸:中型

进口带信号反馈电磁阀德国洛克长期供应

 

进口带信号反馈电磁阀优点:

独特设计、与介质非接触式信号返馈、信号返馈灵敏,能可靠指示阀的开闭,特别适合自动化程度高的闭路系统。带信号电磁阀参照各系列电磁阀中的特点应用,能反映电磁阀是处于开启或关闭状态。

 

进口带信号反馈电磁阀工作原理:

常闭——当线圈通电时,先导阀芯吸合,先导孔打开,阀上腔卸压,活塞靠下腔介质压力推动,电磁阀打开。

当线圈断电时,先导阀芯靠弹簧复位,先导孔关闭,阀上腔由活塞节流孔增压和复位弹簧的推力,电磁阀关闭。

常开——当线圈通电时,先导阀芯靠弹簧复位,先导孔关闭,阀上腔由活塞节流孔增压和复位弹簧的推力,电磁阀关闭。

当线圈断电时,先导阀芯靠弹簧复位,先导孔打开,阀上腔卸压,活塞靠下腔介质压力推动,电磁阀打开。

信号反馈—— 当电磁阀打开时,信号公共线和开信号线接通; 当电磁阀关闭时,信号公共线和关信号线接通。

 

进口带信号反馈电磁阀描述

德国《DE LOCKE》洛克进口带信号反馈电磁阀,电磁阀里有密闭的腔,在不同位置开有通孔,每个孔都通向不同的油管,腔中间是阀,两面是两块电磁铁,哪面的磁铁线圈通电阀体就会被吸引到哪边,通过控制阀体的移动来档住或漏出不同的排油的孔,而进油孔是常开的,液压油就会进入不同的排油管,然后通过油的压力来推动油缸的活塞,活塞又带动活塞杆,活塞杆带动机械装置动。

Description of the imported signal feedback solenoid valve:
German de Lock "lock" is imported with signal feedback solenoid valve. There is a closed cavity in the solenoid valve, and there are through holes in different positions. Each hole leads to different oil pipes. The middle of the cavity is a valve, and two electromagnets are on both sides. The valve body of which magnet coil will be attracted to will be attracted to. The valve body can be blocked or leaked out by controlling the movement of the valve body. The oil inlet hole is usually open, and the liquid hole is open The pressure oil will enter different oil discharge pipes, then push the piston of the cylinder through the pressure of oil, and the piston will drive the piston rod, and the piston rod will drive the mechanical device to move.
 

进口带信号反馈电磁阀技术参数:

1、型号规格:DN15~DN500;

2、适用压力:0.02~15Mpa;

3、适用介质:气、水、油;

4、介质温度:-20~+100℃

5、环境温度: 0~65℃;

6介质粘度:小于50CSt(大于时需定制);

7、防护性能:防水、防爆;

8、防爆标志:ExdⅡ;

9、阀门材质:304、铸铁;

10、控制方式:常开、常闭;

11、电源电压:DC12~127V AC24~380V;

12、连接方式:内螺纹、外螺纹、法兰;

13、 量:零;

Technical parameters of imported solenoid valve with signal feedback:
1. Model and specification: DN 15 ~ DN 500;
2. Applicable pressure: 0.02 ~ 15MPa;
3. Applicable media: gas, water and oil;
4. Medium temperature: - 20 ~ + 100 ℃;
5. Ambient temperature: 0 ~ 65 ℃;
6 medium viscosity: less than 50cst (need to be customized when it is larger than 50cst);
7. Protection performance: waterproof, explosion-proof;
8. Explosion proof sign: Exd Ⅱ;
9. Valve material: 304, cast iron;
10. Control mode: normally open, normally closed;
11. Power supply voltage: DC12 ~ 127V AC24 ~ 380V;
12. Connection mode: internal thread, external thread, flange;
13. Leakage: zero;

联系方式
公司名称 莱恩泵阀制造(珠海)有限公司
联系卖家 叶工 (QQ:1372169544)
电话 尋尉尅将-專尉尃專尅将尉
手机 専將專尃射専專尅尊專尅
传真 尋尉尅将-專尉尃專尋尋将
地址 广东省珠海市