斜管填料榆林厂商禹水沣上门安装
斜管填料榆林厂商禹水沣上门安装
斜管填料榆林厂商禹水沣上门安装
斜管填料榆林厂商禹水沣上门安装
斜管填料榆林厂商禹水沣上门安装
斜管填料榆林厂商禹水沣上门安装
斜管填料榆林厂商禹水沣上门安装
斜管填料榆林厂商禹水沣上门安装
斜管填料榆林厂商禹水沣上门安装

斜管填料榆林厂商禹水沣上门安装

价格

订货量(平方)

¥167.00

≥4

联系人 杨经理 经理

専尅尋將專尃尃専将專將

发货地 河南省郑州市
立即询价 进入商铺
扫码查看

扫码查看

手机扫码 快速查看

在线客服

商品参数
|
商品介绍
|
联系方式
01 榆林斜管填料厂家
02 榆林斜管填料安装
03 榆林斜管填料更换
04 榆林焊接斜管填料
05 榆林聚丙烯斜管填料
07 榆林J340斜管填料
08 榆林乙丙共聚斜管填料
09 榆林斜管沉淀池维修
10 榆林斜管填料施工
11 榆林PP斜管填料
12 榆林斜管长1000mm
13 榆林斜管倾角65°
商品介绍

一辈子很长,要和温暖有趣的人,在一起才美好。


    在中、小型水厂使用较多的是斜管沉淀池,相比较而言,斜管沉淀池处理效果比平流沉淀池好。在实际应用中配水方式和配水均匀性对沉淀效果的影响很大。Inclined tube sedimentation tanks are more commonly used in medium and small water plants. In comparison, the treatment effect of inclined tube sedimentation tanks is better than that of advection sedimentation tanks. In practical applications, the water distribution method and water distribution uniformity have a great influence on the precipitation effect.


    斜管沉淀池是一种把与水平面成一定角度的众多斜管放置于沉淀区中的沉淀设施。其中增设斜管的作用就是为了减少池体的占地面积,并且也相应的增强了池子的处理效果,有效自幌高了表面负荷。运行时原水从下往上流动,颗粒则在中部积累到一定程度自动滑下或直接沉于斜管沉淀池底部。Inclined tube sedimentation tank is a sedimentation facility in which many inclined tubes at a certain angle with the horizontal plane are placed in the sedimentation area. The role of adding inclined pipes is to reduce the floor area of the pool body, and also to correspondingly enhance the treatment effect of the pool, effectively increasing the surface load from the front. During operation, the raw water flows from bottom to top, and the particles accumulate in the middle to a certain extent and automatically slide down or directly sink to the bottom of the inclined tube sedimentation tank.


    根据水流和颗粒的相对运动方向,可以分为侧向流、上向流和同向流三种斜管沉淀池。同向流式沉淀池是指颗粒 和水流均向一个方向流动,在集水支渠的作用下将处理好的水和剩下的污泥分开。上向流沉淀池指的是水流和颗粒的运动方向相反,前者向上流动、后者向下流动。侧向流沉淀池则是水流和颗粒流的方向垂直,前者沿着水平方向流动,后者向着下方流动,因为水流条件不是很好,导致了板间支撑很难布置,现已很少使用,使用较多的是上向流斜管沉淀池。According to the relative movement direction of water flow and particles, it can be divided into three types of inclined tube sedimentation tanks: lateral flow, upward flow and same flow. Co-flow sedimentation tank means that particles and water flow in one direction, and the treated water is separated from the remaining sludge under the action of the catchment branch channel. Upward flow sedimentation tank refers to the opposite direction of water flow and particle movement, the former flows upwards and the latter flows downwards. Lateral flow sedimentation tanks are vertical to the direction of water flow and particle flow. The former flows horizontally, while the latter flows downwards. Because the water flow conditions are not very good, it is difficult to arrange the support between the plates. It is rarely used now. The upflow inclined tube sedimentation tank is more frequently used.


   蜂窝斜板填料主要由聚丙烯材料制成。从浅层理论的基础讲,在斜板上部设置沉淀距离合理的沉淀段,在下部控制斜板的几何形状,使斜板下部形成的絮凝段,通过作用和浅池沉淀机理达到矾花与水分离的目的。各种间距斜板填料均是通过不同高度的塑料肋条来支撑斜板片,肋条与斜板热熔焊接,每两层斜板片之间需要多根肋条支撑,组装工艺复杂,而且斜板内部水流流道成矩形,常适用于上向流沉淀池。The honeycomb inclined plate packing is mainly made of polypropylene material. From the basis of shallow layer theory, a sedimentation section with reasonable sedimentation distance is set on the upper part of the inclined plate, and the geometric shape of the inclined plate is controlled at the lower part, so that the flocculation section formed at the lower part of the inclined plate can reach the alum blossom and water The purpose of separation. Various pitch sloping plate fillers are supported by plastic ribs of different heights. The ribs and the sloping plate are thermally welded. Each two layers of sloping plate need to be supported by multiple ribs. The assembly process is complicated and the inside of the sloping plate The water flow channel is rectangular, which is often suitable for upflow sedimentation tanks.


    斜管沉淀池运行调试:检查进水是否均匀,不得对沉淀池造成冲击,影响沉淀效果,堰槽高低及水平度至,保持均匀,经过以上施工工序,至此斜管沉淀池填料安装已经全部完成。正常投入使用后需要根据进水中悬浮物浓度情况确定排泥周期,注意及时排泥,确保斜管沉淀池始终保持良好的运行状态及令人满意的水质。Operation and debugging of inclined tube sedimentation tank: check whether the water inflow is uniform, and shall not cause impact on the sedimentation tank and affect the sedimentation effect. The height and level of the weir and trough shall be kept uniform. After the above construction process, the installation of the filler of the inclined tube sedimentation tank has been completed. . After normal operation, the sludge discharge cycle needs to be determined according to the concentration of suspended solids in the inlet water, and attention should be paid to timely sludge discharge to ensure that the inclined tube sedimentation tank always maintains good operating conditions and satisfactory water quality.

    斜管支架采用主支架、副支架、网片的组合结构,主支架采用倒三角形截酣,抗弯截面模量大,承载能力高,该截面形状大大地减少了支架本身的自重;主支架两根上部钢管之间沿度方向间隔地采横钢管连接,将现有技术中主支架底边的实体结构变为中空结构,从而增加了水流的下.升通道和污泥的下降通道。副支架采用箏片桁架结构,强度高,重量轻,在由主副支架构成的网架上铺设网片,使得斜管支架上表面处在同一水平而内且网格均匀,从而使斜管能够均匀的与网片接触,斜管不会因局部的不平整或受力不均而倒塌或损坏。The inclined tube bracket adopts the combined structure of the main bracket, the auxiliary bracket, and the mesh. The main bracket adopts an inverted triangle section, which has a large bending section modulus and high bearing capacity. This section shape greatly reduces the self-weight of the bracket; the two main brackets The upper steel pipes are connected by horizontal steel pipes at intervals along the degree direction, and the solid structure of the bottom side of the main support in the prior art is changed to a hollow structure, thereby increasing the ascending channel of water flow and the descending channel of sludge. The auxiliary bracket adopts the truss structure of zheng piece, which is high in strength and light in weight. The mesh is laid on the grid composed of the main and auxiliary brackets, so that the upper surface of the inclined tube bracket is at the same level and the grid is uniform, so that the inclined tube can be Even contact with the mesh, the inclined tube will not collapse or damage due to local unevenness or uneven force.



    忍耐不是懦弱,而是宽容;退让不是无能,而是大度。人生,没有走不过的经历,只有走不出的自己;感情,没有过不去的曾经,只有过不去的心情。有些人你忘不了,只能是独自苦恼;有些情你放不下,只能是庸人自扰。



    《诗经·大雅》“文王有声”篇有“沣水东注,维禹之绩”。东汉经学家郑玄对这句笺云:“昔尧时洪水,而沣水亦泛滥为害,禹治之使入洞,东注于河,禹之功也。河南禹水沣环保科技有限公司的“禹水沣”三字正是取之于此,斯人已逝,风骨犹存。作为一家以聚丙烯酰胺、聚合氯化铝、活性炭系列为核心业务的创新型环保科技企业,我们的产品可广泛应用于自来水、高纯水、洗煤水、印染水、城市污水、选矿废水、制革废水、钢厂污水、电镀废水等各领域水处理行业,是广大企业的理想合作伙伴,下属企业:巩义市夹津口多来净水材料厂! 




    巩义市夹津口多来净水材料厂是一家以无烟煤滤料、离子交换树脂、聚丙烯酰胺、聚合氯化铝、氯化羟铝、活性炭、纤维球、化学除油器填料等净水材料为主打产品的企业,拥有相对完整和科学的质量管理体系。我们注重自身的诚信、实力和产品质量。欢迎各界朋友莅临参观、指导和业务洽谈。


联系方式
公司名称 河南禹水沣环保科技有限公司
联系卖家 杨经理 (QQ:359431906)
电话 尋將尉専-專尅将専将尉尉将
手机 専尅尋將專尃尃専将專將
传真 尋將尉専-專尅将専将尉尉将
地址 河南省郑州市