进口电动高压小型球阀德国洛克供应各种规格
价格
订货量(台)
¥2800.00
≥1
店铺主推品 热销潜力款
専將專尃射専專尅尊專尅
在线客服
- 基本信息
- 品牌:德国洛克
- 型号:DE LOCKE
- 驱动方式:气动
- 介质温度:-40℃≈180℃℃
- 工作压差:16~80mpa
- 适用介质:水
- 压力环境:高压
- 货号:20204201
- 用途:开关
- 外型尺寸:中型
进口电动高压小型球阀德国洛克供应各种规格
进口电动高压小型球阀性能范围:
规格范围 DN6-DN80
温度范围 -40℃≈180℃
压力范围 160-500BAR 10000PSI 16-80Mpa 150LB-2500LB
阀体材质 碳钢、304、316SS
连接方式 对焊、卡套、卡箍、内螺纹、外螺纹连接
球封材料 POM(聚甲醛)、PTFE(聚四氟乙烯)
密封材料 NBR(丁晴橡胶)、FPM/FKM(氟橡胶)
手柄形式 锌合金曲手柄 、铸钢曲手柄
适用范围 气体、燃气、水、油品、蒸汽及某些腐蚀性液体
制造标准 国标GB、JB、HG,API、ANSI,英标BS,日本JIS、JPI等
进口电动高压小型球阀产品特点:
1.结构紧凑,耐压性能好
2.双密封面,性能更可靠
3.启闭扭矩轻,开关迅速
4.阀腔全通径结构,流体阻力小
5.适用范围广,通径适合大小管道
6.维修方便,密封圈是活动的,拆卸更换都方便
适用介质:水、蒸汽、气体、液压油等介质。
进口电动高压小型球阀产品概述:
德国《DE LOCKE》洛克进口电动高压小型球阀是由锻钢高压阀体及电子式角行程电动执行器组成。电动执行器采用一体式结构,输入220V电源即可直接进行开关量调节,亦可内置伺服模块,输入控制信号(4~20mADC或1~5VDC)及单相电源即可控制运转。电动高压小型球阀具有结构紧凑、体积精小、运行可靠、密封性好、维修容易、安装方便、适应性强等优点。特别适合于介质是粘稠、含颗粒、纤维性质的场合。
广泛应用于石油、化工、教学设备、轻工、高压设备、制药、造纸等工业自动控制系统中,作远距离集中控制或就地控制。
Introduction of imported electric high pressure small ball valve products:
German "de Locke" imported electric high pressure small ball valve is made of forged steel high pressure valve body and electronic angular stroke electric actuator. The electric actuator adopts an integrated structure. It can directly adjust the switching value by inputting the 220 V power supply. It can also have a built-in servo module. It can control the operation by inputting the control signal (4 ~ 20 ADC or 1 ~ 5 VDC) and single-phase power supply. Electric high pressure small ball valve has the advantages of compact structure, small volume, reliable operation, good sealing, easy maintenance, easy installation, strong adaptability and so on. It is especially suitable for the occasions where the medium is viscous, granular and fibrous.
Widely used in petroleum, chemical industry, teaching equipment, light industry, high voltage equipment, pharmaceutical, paper and other industrial automatic control systems for remote centralized control or local control.