在生产的时候必须准备的就是大量的现浇骨架护坡模具，这种模具可以进行拼接在预制厂中进行预制生产，也可以在现场进行组装，然后直接进行浇筑这都是可以的。具体要看施工方的施工方案来进行决定。

模具性能：

现浇骨架护坡模具是在现场浇筑的话，需要先进行山体切削的处理，因为很多的公路建设会挨着山体的两侧，那么如果存在一些不平整的情况，或者是土壤松动，就容易在雨天出现山体滑坡甚至是山石滚落，给过往的车辆造成一定的伤害，也会让整条公路的通行出现问题，那么在施工的过程中对山坡进行切削的话，需要将一些腐烂的垃圾还有一些树枝石头之类的杂质清理干净，整个山体的坡面是处在一个比较平缓的角度，之后再将模具一段一段的拼接在上面，等到模具固定好之后不会出现松动的情况下，就可以把泥浆注入在拱形骨架模具中来进行生产了，现场浇筑的好处就是时间短。In production, a large number of cast-in-place skeleton slope protection molds must be prepared. The molds can be spliced, prefabricated in the prefabrication plant, or assembled on site, and then poured directly. It depends on the construction scheme of the construction party.

Mold performance:

If the cast-in-place skeleton slope protection mold is cast on site, it needs to be cut first, because many highway construction will be close to both sides of the mountain. If there are some uneven conditions, or the soil is loose, it is easy to have landslides or even rocks rolling down in rainy days, causing certain damage to passing vehicles, If the hillside is cut during construction, some rotten garbage and some impurities such as branches and stones need to be cleaned up. The slope of the whole mountain is at a relatively gentle angle, and then the molds are spliced on it section by section, When the mold is fixed, the slurry can be injected into the arch framework mold for production without loosening. The advantage of on-site pouring is that the time is short.