PC-昌成CLC-945-无卤阻燃-塑胶原料
价格
订货量(包/25kg)
¥35.60
≥1
店铺主推品 热销潜力款
莸莶莼莹莻获莾莾莼莾莼
在线客服
物性 Properties | 测试标准 Test Method | 测试条件 Test condition | 数值 Value | 单位 Unit |
物理性质 Physical | ||||
熔融指数 Melt Flow Rate | ASTM D 1238 | 300℃,1.2kg | 15(±3) | g/10 min |
密度 Density | ASTM D 792 | Natural color | 1.19 | g/cm3 |
收缩率 Mould Shrinkage | ASTM D 955 | 0.5-0.7 | % | |
机械性质Mechanical | ||||
拉伸强度 Tensile Strength | ASTM D 638 | 50mm/min | 60 | MPa |
伸长率 Elongation | ASTM D 638 | 50mm/min | 100 | % |
弯曲强度 Flexural Strength | ASTM D 790 | 2.8mm/min | / | MPa |
弯曲模量 Flexural Modulus | ASTM D 790 | 2.8mm/min | / | MPa |
缺口冲击强度 Izod, Notched @ 23oC | ASTM D 256 | 3.2mm | 640-680 | J/m |
热学性质Thermal | ||||
热变形温度 HDT | ASTM D 648 | 18.56kgf/cm² | 125 | ℃ |
阻燃性Flammability | ||||
UL 94 Classification @ 1.6 mm | UL 94 | V0 | | |
参考加工条件Recommended Processing Conditions | ||||
注塑 | ||||
干燥温度Drying Temperature | | 100 - 120 | ℃ | |
干燥时间Drying Time | | 2 - 4 | Hrs | |
料筒温度Barrel Temperature | 后段 Rear | 260 – 270 | ℃ | |
| 中段 Middle | 260 – 270 | ℃ | |
| 前段 Front | 260 – 270 | ℃ | |
| 喷嘴 Nozzle | 260 – 270 | ℃ | |
模具温度 Mold Temperature | | 90 - 120 | ℃ | |
备注Remarks | ||||
上述为试验室采用标准测量方法测定的代表数值。 |