人字骨架护坡模具   人字形塑料骨架护坡模具的尺寸选择主要是根据高速公路、高铁的建设而言的，一般常规的尺寸在三米左右，属于型号较大的钢模具了，不过更大或更小的模具都是存在的，一般大都是使用三毫米的面板五毫米的筋板经过一定的处理制作成型的，再加上螺栓的使用是模具的整体规格更加准确了，并且根据按需定制的方式能使他的形状、尺寸都很好的适应坡道上的生产情况，这种人字骨架护坡模具   人字形塑料骨架护坡模具批量的使用在坡道上进行，按照生产的需求将其铺设坡道上，在铺设时要保障各套模具间的相互位置是准确的，这样在浇注混凝土使模具才会稳定的运行，用来连接的螺栓在施工前也要确定他的紧固程度，每个步骤都严格的操作，人字骨架护坡模具   人字形塑料骨架护坡模具在进行正常的生产时才不会出现漏浆、变形的情况。因为使用的混凝土原料是会对模具产生一定的磨损的，尤其是如果混凝土内的石子的含量过多的话就会对模具产生较大的损伤，增加了模具更换的次数，所以原料的选择也是非常重要的。The size selection of herringbone skeleton slope protection mold herringbone plastic skeleton slope protection mold is mainly based on the construction of Expressway and high-speed railway. Generally, the conventional size is about 3M, which belongs to the steel mold with larger model. However, larger or smaller molds exist. Generally, most of them are made and formed by using 3mm panel and 5mm rib plate after certain treatment, In addition, the use of bolts makes the overall specification of the mold more accurate, and its shape and size can be well adapted to the production situation on the ramp according to the way of customization on demand. This herringbone skeleton slope protection mold herringbone plastic skeleton slope protection mold is used in batches on the ramp and laid on the ramp according to the production requirements, During laying, ensure that the mutual position of each set of molds is accurate, so that the molds can operate stably when pouring concrete. The fastening degree of bolts used for connection shall also be determined before construction. Each step shall be operated strictly. The herringbone skeleton slope protection mold herringbone plastic skeleton slope protection mold will not leak slurry during normal production Deformation. Because the concrete raw materials used will cause certain wear to the mold, especially if there is too much stone in the concrete, it will cause great damage to the mold and increase the number of mold replacement, so the selection of raw materials is also very important.