德国洛克进口高纯气体减压阀报价

一、进口高纯气体减压阀产品特征：

进口高纯气体减压阀，单级式膜片减压结构，不锈钢膜片压力传输，输出压力稳定，适用于纯净气体、标准气体、腐蚀性气体等。用用于石油化工、化纤、照明电器、热处理、冶金、玻璃、食品、医药、电子、国防航天、主导领域。

德国《LOCKE》洛克进口高纯气体减压阀接口可以适配国内所有规格的钢瓶接口，特有的入口压力补偿技术抵消了因钢瓶用气后压力下降导致的阀后压力变动的问题。

Imported high purity gas pressure reducing valve, single-stage diaphragm pressure reducing structure, stainless steel diaphragm pressure transmission, stable output pressure, suitable for pure gas, standard gas, corrosive gas, etc. It is used in petrochemical industry, chemical fiber, lighting appliances, heat treatment, metallurgy, glass, food, medicine, electronics, national defense, aerospace and leading fields.

The high purity gas pressure reducing valve imported by Locke in Germany can adapt to all specifications of cylinder interfaces in China. The unique inlet pressure compensation technology offsets the problem of pressure change behind the valve caused by pressure drop after cylinder gas consumption.

二、进口高纯气体减压阀描述：

德国LOCKE洛克进口高纯气体减压阀，就是将高纯气体钢瓶中的高压气体减为实验及工况所需的低压气体压力的减压阀。采用活塞式减压结构，输出压力稳定，主要用于石油化工、化纤、照明电器、热处理、冶金、玻璃、食品、医药、电子、国防航天、航空等主导领域的高纯气体钢瓶的出口减压。

高纯气体一般都是贮存在专用的高压气体钢瓶中，使用时通过减压阀使气体压力降至实验所需范围，再经过其它控制阀门细调，使气体输入使用系统。由于高纯气体气瓶内压力较高，而气焊和气割和使用点所需的压力却较小，所以需要用减压器来把高纯气体储存在气瓶内的较高压力的气体降为低压气体，并应保证高纯气体所需的工作压力自始至终保持稳定状态。进口高纯气体减压器是将高压高纯气体降为低压气体、并保持输出高纯气体的压力和流量稳定不变的调节装置。

The high-purity gas pressure reducing valve imported from locklock, Germany, is a pressure reducing valve that reduces the high-pressure gas in the high-purity gas cylinder to the low-pressure gas pressure required by the experiment and working conditions. It is mainly used for the export decompression of high-purity gas cylinders in the leading fields of petrochemical industry, chemical fiber, lighting appliances, heat treatment, metallurgy, glass, food, medicine, electronics, national defense, aerospace, aviation, etc.

High purity gas is usually stored in a special high-pressure gas cylinder. During use, the gas pressure is reduced to the required range of the experiment through the pressure reducing valve, and then the gas is input into the use system through other control valves. Because the pressure in the high-purity gas cylinder is high, but the pressure required for gas welding, gas cutting and use point is small, it is necessary to use a pressure reducer to reduce the high-pressure gas stored in the cylinder to low-pressure gas, and ensure that the working pressure required for the high-purity gas is stable from the beginning to the end. The imported high-purity gas decompressor is a regulating device which can reduce the high-pressure and high-purity gas to low-pressure gas and keep the pressure and flow of the output high-purity gas stable.

三、进口高纯气体减压阀结构参数：

1、最大输入压力： 3000，6000psi

2、 输出压力：0~250,0~500,0~1500,0~3000psi

3、 安全测试压力：1.5倍的最大进气压力

4、适用温度：-10℉~+165℉(-23℃~+74℃)

5、泄漏率：泡沫测试

6、 CV值：0.06

7、 重量：0.9kg

1. Maximum input pressure: 30006000 PSI

2. Output pressure: 0 ~ 250,0 ~ 500,0 ~ 1500,0 ~ 3000psi

3. Safety test pressure: 1.5 times of the maximum intake pressure

4. Applicable temperature: - 10 ° f to + 165 ° f (- 23 ° C to + 74 ° C)

5. Leakage rate: foam test

6. CV value: 0.06

7. Weight: 0.9kg

四、进口高纯气体减压阀设计特点：

1、活塞式减压结构

2、母体螺纹：1/4" NPT(F)

3、内设过滤网

4、可采用面板式或墙式安装

1. Piston type pressure reducing structure

2. Female thread: 1 / 4 "NPT (f)

3. Built in filter screen

4. Panel or wall mounting