上海富览进出口贸易有限公司
店龄4年 · 企业认证 · 上海市奉贤区
手机扫码查看 移动端的落地页
进口小流量钢瓶减压阀德国洛克品牌产品介绍
价格
订货量(台)
¥1300.00
≥1
店铺主推品 热销潜力款
쑥쑝쑢쑥쑦쑞쑞쑞쑞쑟쑤
在线客服
进口小流量钢瓶减压阀
产品名称 | 进口小流量钢瓶减压阀 | 产品型号 | LOCKE |
产品品牌 | 德国《LOCKE》洛克 | 产品包装 | 木箱 |
驱动方式 | 自力式 | 公称通径 | DN6~DN25 |
连接方式 | 螺纹、卡套、法兰 | 公称压力 | PN3.2~32Mpa |
结构形式 | 膜片式、活塞式 | 适用温度 | -40℃~+74℃ |
阀体材质 | 黄铜、316L | 制造标准 | 德国洛克原厂标准 |
适用介质 | 气体、液体等 | ||
应用场合 | 石油化工、化纤、照明电器、热处理、冶金、玻璃、食品、医药、电子、国防航天等主导领域。 | ||
产品报价 | 面议,电议(欢迎来电咨询 400-8828-037 021-51870285) | ||
产品产地 | 德国 | ||
生产厂家 | 德国洛克阀门国际集团 | ||
指定代理 | 上海富览进出口贸易限公司(中国总代理商及上海办事处) |
一、进口小流量钢瓶减压阀设计特点:
● 活塞式减压结构 ● 母体螺纹:1/4" NPT(F) ● 内设过滤网 ● 可采用面板式或墙式安装
■ 适用范围
● 实验室 ● 气体分析测试 ● 流程控制 ● 气体汇流排 ● 测试设备
■ 特性参数
● 最大输入压力: 3000,6000psig ● 输出压力:0~250,0~500,0~1500,0~3000psig
● 安全测试压力:1.5倍的最大进气压力 ● 适用温度:-10℉~+165℉(-23℃~+74℃)
● 泄漏率:泡沫测试 ● CV值:0.06 ● 重量:0.9kg
材质:
◆母体:316L,Brass
◆上盖:316L,Brass
◆膜片:316L
◆过滤网:316L(10μm)
◆阀座:PCTFE,PTFE,Vespel
◆弹簧:316L
◆阀芯顶杆:316L
Piston type pressure reducing structure ● mother thread: 1 / 4 "NPT (f) ● filter screen inside ● can be installed in panel or wall
■ scope of application
● laboratory ● gas analysis and test ● process control ● gas bus ● test equipment
Characteristic parameters
Maximum input pressure: 30006000 psi ● output pressure: 0 ~ 250,0 ~ 500,0 ~ 1500,0 ~ 3000psi
Safety test pressure: 1.5 times of maximum inlet pressure ● applicable temperature: - 10 ℃~ 165 ℃ (- 23 ℃ ~ + 74 ℃)
Leakage rate: foam test > CV: 0.06: weight: 0.9kg
texture of material:
Maternal body: 316L, brass
Upper cover: 316L, brass
Membrane: 316L
Filter screen: 316L (10 μ m)
Valve seat: PCTFE, PTFE, Vespel
Spring: 316L
Valve core ejector: 316L
二、进口小流量钢瓶减压阀产品特征:
进口小流量钢瓶减压阀,单级式膜片减压结构,不锈钢膜片压力传输,输出压力稳定,适用于纯净气体、标准气体、腐蚀性气体等。用用于石油化工、化纤、照明电器、热处理、冶金、玻璃、食品、医药、电子、国防航天等主导领域。
德国洛克进口小流量钢瓶减压阀接口可以适配国内所有规格的钢瓶接口,特有的入口压力补偿技术抵消了因钢瓶用气后压力下降导致的阀后压力变动的问题。
Imported small flow cylinder pressure reducing valve, single-stage diaphragm pressure reducing structure, stainless steel diaphragm pressure transmission, stable output pressure, suitable for pure gas, standard gas, corrosive gas, etc. It is used in petrochemical, chemical fiber, lighting appliances, heat treatment, metallurgy, glass, food, medicine, electronics, national defense and aerospace.
The small flow cylinder pressure relief valve interface imported from Germany Locke can adapt to all domestic cylinder interfaces. The unique inlet pressure compensation technology can offset the problem of pressure change behind the valve caused by the pressure drop of cylinder after using gas.
三、进口小流量钢瓶减压阀规格参数:
◆最大输入压力:3000,500 psig
◆输出压力:0~25,0~50,0~100, 0~250 psig
◆安全测试压力:1.5倍的最大输入压力
◆适用温度:-40°F 至+165°F(-40℃至+74℃)
Maximum input pressure: 3000500 PSI
Output pressure: 0-25, 0-50, 0-100, 0-250 psi
Safety test pressure: 1.5 times of the maximum input pressure
Applicable temperature: - 40 ° f to + 165 ° f (- 40 ℃ to + 74 ℃)
四、进口小流量钢瓶减压阀产品简介:
德国LOCKE洛克公司生产的进口小流量钢瓶减压阀是一种用于实验室、气体汇流排、测试设备等场合,主要流体介质为高纯气体、非腐蚀性气体、腐蚀性气体和有毒气体:氧气、氢气、特种气体等。用于小口径管路,对输出压力微小精确,且对流量要求不高的工况。
The imported small flow cylinder pressure reducing valve produced by German locklock company is used in laboratory, gas manifold, testing equipment and other occasions. The main fluid medium is high-purity gas, non corrosive gas, corrosive gas and toxic gas: oxygen, hydrogen, special gas, etc. It is used for small diameter pipeline, small and accurate output pressure and low flow requirement.