广东台铭实业有限公司
广东台铭实业有限公司
店龄4年 · 企业认证 · 广东省东莞市
主营产品: 大功率LED灯珠, 0603贴片led灯, 贴片led灯珠, led灯珠, 0805贴片led灯, 视觉光源led灯珠, 1206贴片led灯, 全光谱led灯珠, COB 面光源, 红外线接收头, 数码管, 汽车照明led灯珠, 安防led产品, 0201贴片LED灯, 贴片侧发光led灯, 直插led灯珠, 双色led灯珠, 带座led灯珠, UV紫光LED灯珠, led灯珠厂家, 光敏三极管, 红外对管, 食人鱼led灯珠, 2835贴片led灯
免费会员
立即询价
进入商铺 手机扫码查看 移动端的落地页
店龄4年 · 企业认证 · 广东省东莞市
钳钼钴钹钺钸钼钴钺钴钺
台铭实业智能装备专用草帽灯珠插件led
价格
订货量(个)
¥0.01
≥10000
店铺主推品 热销潜力款
联系人 陈子华
钳钼钴钹钺钸钼钴钺钴钺
发货地 广东省东莞市
在线客服
商品参数
|
商品介绍
|
联系方式
品牌 台铭实业
封装 1000
产品类型 直插
应用范围 照明指示灯
电流 20mA
电压 1.8-2.4V
发光颜色 黄光
波长 585-595nm
商品介绍
台铭直插式LED,体积小,高亮度,能耗低,应用于照明,背光等领域。
注:亮度、角度、色温、紫光波段均可按客户要求做货。
Type 规格/型号 | Emitting Colo r 颜色 | Material 原材料 | View Angle 发光角度 | VF(V) 电压 | IV (MCD) 亮度 | WL(nm) 波长 | IF(MA) 电流 | |||
Typ | Max | Min | Typ | Min | Max | |||||
TM-L05CMR-E (红光) | Red | AlGaInP | 110° | 1.8 | 2.4 | 3000 | 4000 | 620 | 630 | 20MA |
TM-L05Y-E (黄光) | Yellow | AlGaInP | 110° | 1.8 | 2.4 | 300 | 800 | 585 | 595 | 20MA |
TM-L05CMCG-E (翠绿) | Green | InGaN/GaN | 110° | 2.8 | 3.4 | 3000 | 4000 | 520 | 530 | 20MA |
TM-L05CMB-E (蓝光) | Blue | InGaN/GaN | 110° | 2.8 | 3.4 | 800 | 1200 | 460 | 475 | 20MA |
TM-L05UVCM365-E (紫光) | Purple | InGaN/GaN | 110° | 2.8 | 3.4 | 6 | 8 | 365 | 370 | 20MA |
TM-L05UVCM370-E (紫光) | Purple | InGaN/GaN | 110° | 2.8 | 3.4 | 10 | 13 | 370 | 375 | 20MA |
TM-L05UVCM380-E (紫光) | Purple | InGaN/GaN | 110° | 2.8 | 3.4 | 14 | 18 | 380 | 385 | 20MA |
TM-L05UVCM400-E (紫光) | Purple | InGaN/GaN | 110° | 2.8 | 3.4 | 60 | 70 | 395 | 400 | 20MA |
TM-L05UVCM405-E (紫光) | Purple | InGaN/GaN | 110° | 2.8 | 3.4 | 70 | 80 | 400 | 405 | 20MA |
TM-L05UVCM410-E (紫光) | Purple | InGaN/GaN | 110° | 2.8 | 3.4 | 80 | 90 | 405 | 410 | 20MA |
TM-L05ZBCM55-E (白光) | White | InGaN/GaN | 110° | 2.8 | 3.4 | 1800 | 2200 | 2500 | 21000 | 20MA |
Supporter shaping:
Shaping of the supporter must be conducted before welding. While shaping, the
bending position of the supporter must at least be located at 3mm from the bottom
of the encapsulating resin. Also, avoid multiple bending on the same position。 Please
choose the
appropriate apparatus to fixate the supporter in order to avoid exerting extra pressure
on resin. Using the jointing section of the pin and resin as fulcrum is strictly
prohibited since the pressure mounted would directly damage the internal 。
illuminating structure and thus cause irreversible defection of the product..Due to the
same reason, the interval between the welding hole on the PCB board should be
strictly matched with the pin interval of the product when assembling the product.
bending position of the supporter must at least be located at 3mm from the bottom
of the encapsulating resin. Also, avoid multiple bending on the same position。 Please
choose the
appropriate apparatus to fixate the supporter in order to avoid exerting extra pressure
on resin. Using the jointing section of the pin and resin as fulcrum is strictly
prohibited since the pressure mounted would directly damage the internal 。
illuminating structure and thus cause irreversible defection of the product..Due to the
same reason, the interval between the welding hole on the PCB board should be
strictly matched with the pin interval of the product when assembling the product.
- 应用范围:照明,背光等
联系方式
公司名称 广东台铭实业有限公司
联系卖家 陈子华
手机 钳钼钴钹钺钸钼钴钺钴钺
地址 广东省东莞市