宏旭定制   圆形井体模具  井体钢模具

井体钢模具  圆形井体钢模具专业生产预制井体模具，井体模具，井体钢模具，预制井体钢模具，混凝土井体模具，混凝土井体钢模具，路基边沟盖板塑料模具，花砖塑料模具等各种塑料模具和钢模具。

井体钢模具  圆形井体钢模具平常要怎么清洗呢?先是模具表面灰尘的清扫:用干净的抹布抹完之后，用手摸模具表面，如果感觉不到有灰尘的话，那么就是合格。冲孔部位的清扫:用锤子把孔内的废料还有滑料板上粘着的废料和刃口部位切废料的残屑全部清除掉。有镀层的模具，必须对模具的拉伸表面进行清扫，必须用手来确认表面是否光洁，生产时的材料必须用抹布抹干净，生产后，必须给模具涂上少许的油。还有就是装模前要对模具的上下表面进行清擦，保证模具安装面和压机工作台面不受压伤及模具在生产中上下安装面的平行度。模具装好后将模具打开，将模具各部分清擦干净，特别是导向机构，对于表面件模具，其型面清擦干净，以保证制件的质量，这就是有关模具的平时的清洗地介绍。

Well body steel mold round well body steel mold professional production Prefabricated well body mold, well body steel mold, prefabricated well body steel mold, concrete well body mold, concrete well body steel mold, roadbed side ditch cover plate plastic mold, brick plastic mold and other plastic mold and steel mold.

How to clean the round well steel mold? First, clean the dust on the surface of the mold: after wiping with a clean cloth, touch the surface of the mold by hand. If there is no dust, then it is qualified. Cleaning of punching part: use hammer to remove all the scraps in the hole, the scraps stuck on the slide plate and the scraps from the cutting edge. For the coated mold, the drawing surface of the die must be cleaned, and the surface must be confirmed by hand. The materials used in production must be wiped clean with cloth. After production, the mold must be coated with a little oil. In addition, the upper and lower surfaces of the mold should be cleaned before the mold is installed, so as to ensure that the mold mounting surface and the working table of the press will not be damaged by pressure and the parallelism of the upper and lower mounting surfaces of the mold in production. After the mold is installed, open the mold and clean all parts of the mold, especially the guiding mechanism. For the surface part mold, the surface is cleaned to ensure the quality of the product. This is the introduction of the usual cleaning place of the mold.